How-To
1911 80% Tactical Machining Build, Part 8: Fitting the Slide
How to hand fit the 1911 slide with files, lapping compound, and tons of hammering.
Get latest articles from Eric HungPage 12 of 12
How-To1911 80% Tactical Machining Build, Part 7: Sear & Hammer Pin Holes
Using Tactical Machining's 1911 80% jig to cut the hammer and sear pin holes.
How-To1911 80% Tactical Machining Build, Part 6: Barrel Seating
How to setup your 80%, jig, and 18mm ball end mill for 1911 barrel seating.
How-To1911 80% Tactical Machining Build, Part 5: Cutting the Slide Rail
Cutting the 1911 80% slide rail with Tactical Machining's jig and a 3/32 key seat cutter.
19111911 80% Tactical Machining Build, Part 4: Basic Fitting
1911 barrel bushing to slide fitting, trigger fitting, and beavertail safety fitting.
19111911 80% Tactical Machining Build, Part 3: Parts List
Find out all the parts I bought to complete my 1911 80% build from slide, barrel, springs, pins, to smaller tools and paint.
How-To1911 80% Tactical Machining Build, Part 2: Tools
Setting up with a drill press, vise, jig, and drill bits.
- 80%
1911 80% Tactical Machining Build, Part 1: Intro
Not sure about your Tactical Machining 1911 80% project? Follow step-by-step from buying the paperweight & jigs, to tooling setup & custom parts selection.