# PSA Sabre AR-15 Review: 13.7" & 20" -- core/separator -- Palmetto State Armory is a name familiar to budget-minded shooters, but at SHOT Show 2023, the firearms manufacturer announced they were releasing a premium line of rifles. Called Sabre, the guns promised to provide a higher-end experience, with one of them even touted as being capable of shooting 1 MOA. This wasn’t hard to believe, but PSA also indicated the guns would still be *below* a $1,000 price tag. We can agree that you usually get what you pay for. But can you get higher-end performance out of a rifle in this price range? Palmetto sent us a couple of models to test for ourselves, and we set out to answer that very question. -- ppt/shared-text-box-widget -- **Palmetto State Armory Sabre-15** By the Numbers -------------- **Reliability: 8/10** While the 13.7" Sabre was flawless with everything we fed it, the 20 inch struggled with steel cased ammo until I cleaned the feed ramps. Then, it was fine. As of Summer 2026 our total round count is now 1100+. **Accuracy: 8/10** Taming standard, practice ammo to 2 MOA is good, but with the right ammo, the 20” rifle is 1 MOA. **Ergonomics: 8/10** While both guns we tested were very ergonomic, only the 20 inch had ambidextrous controls. **Customization: 10/10** As a standard AR-15 style rifle, you can greatly customize and add just about any accessory you like. **Value: 8/10** Providing these kind of higher end features and performance at under $1,000 is an admiral goal. **Overall: 8.4/10** PSA Sabre Pros & Cons ------------------------- **Pros** - Good value - Premium features - Good accuracy **Cons** - Struggled with steel-cased ammo - Slightly heavy PSA Sabre Specs & Features ------------------------------ **Specs** - **Caliber**: .223 Wylde - **Action**: Semi-auto - **Length**: 38-41.2" - **Barrel Length**: 20" - **Height**: 7" - **Width**: 2.6" - **Weight**: 7.6 lbs - **Capacity**: 30+1 - **Comes with**: Cardboard box, one 30-round magazine, owner's manual **Features** - Billet upper & lower - Hiperfire RBT Trigger - Radian Raptor charging handle - Taccom 3 Stage Buffer system How I Tested the PSA Sabre -------------------------- ### Reliability Testing & Round Count I went through 500 rounds of ammunition, using 55 grain AAC, 69 grain Remington Match, 44 grain PMC Bronze, 75 grain Speer Gold Dot, and 55 grain Tul Ammo. I also tested the gun with multiple magazines to make sure it fed properly. In addition, I used a Lyman Digital Trigger Gauge to measure average trigger pull weight. ### Accuracy Testing For this review, I tested the PSA Sabre 20-inch with a Primary Arms 6-30X56 FFP, shooting 5-round groups at 100 yards. When testing, I shoot prone, supported, and standing to see how the rifle performs in different positions. Range Testing the PSA Sabre: Accuracy & Reliability Analysis ---------------------------------------------------------------- Because of the specs of this gun, we had to lay it out in a shady spot of Texas ranch and see what kind of groups it might produce. The allure of 1 MOA mentioned at SHOT Show was still ringing in my ears. I mounted some superior glass, a **[Primary Arms 6-30X56 FFP](https://admin.pewpewtactical.com/go/primaryarms/primary-arms-plx-6-30x56-ffp-rifle-scope-illuminated-acss-apollo-reticle-6-5cr-224v-2/)**, so I could see my groups from 100 yards. This scope was possibly overkill but certainly more than equal to the task. With that complete, I settled into a prone position using a rest to shoot several 5-shot groups at 100 yards. The rifle is certainly capable of 1 MOA, as we learned, depending on the ammunition used. Standard, run-of-the-mill stuff grouped around 2 MOA, and match ammo was 1 MOA. The only issue we ran into was problems with feeding steel-cased Tul Ammo.
**MOA Chart**
AAC 55 grain2.5 MOA
Remington Premier Match 69 grain1 MOA
PMC Bronze 55 grain1.3 MOA
Speer Gold Dot 75 grain1.5 MOA
Tul Ammo 55 grain5.5 MOA
Here we experienced several failures to feed and had to work our way through malfunctions. Eventually, I got enough to get a 5-shot group together, and the accuracy was about what you’d expect. After cleaning the feed ramps of the Sabre fully, I was able to finish the better part of a magazine of steel-cased ammo without any problems. Notably, the 13.7 Sabre had no problems running the Tul Ammo whatsoever. While the rifle is a bit heavy, it’s not the heaviest I’ve reviewed, even recently. It’s also a bit weighted to the front, but that is somewhat expected with a 20-inch barrel. The recoil impulse was minimal, and I found the rifle was a breeze to shoot. I didn’t adjust the gas system though considered it when we had issues with the steel-cased ammo. The 13.7-inch gun was akin to a rabid beast that ate up and shot out anything I fed it. By comparison, it was lightweight and much more nimble. The 3-pronged muzzle device did a great job overall and also provided us with several seconds of what I’d guess to be a high C after each shot. -- ppt/ammo-widget -- Ergonomics: Fit & Feel -------------------------- Again, focusing primarily on the 20-inch billet gun, the fit and feel of this firearm are more refined than previous PSA products I’ve handled. The milled receiver and lower are very nice, and while stylish, they’re still very functional. Fit between the upper and lower is good though there is a tiny bit of wiggle. Moving forward, the handguard is extremely nice, with slanted vents cut into the portions above and below the barrel. There are M-LOK slots present at the traditional 12, 3, 6, and 9 positions, but notably, an 8-inch section of textured pattern exists on the side of the rail where the support hand comes into contact. The lines of the rail don’t perfectly flow into the receiver, but the lockup is extremely good, with a 3-bolt mounting system. Picatinny rail adorns the very front at the top, disappears for a while as you work your way down, then reappears again over the receiver. The entire effect is beefy and strong without being unduly heavy. The milling definitely stands out when compared to standard forged uppers and lowers. ### Controls Controls are largely ambidextrous in that on the right side, you have a standard fire control and mag release, but above this, there is a bolt release, which is a nice touch. On the left side, the fire control is echoed, as is the mag release, bolt release, and the usual bolt catch. Mil-spec is great as far as standards go, but mil-spec charging handles simply suck, in my humble opinion. PSA included a **Radian charging handle**, and this is an appreciated upgrade — one I would have done anyway. It’s worth noting the 13.7-inch Sabre did not have ambidextrous controls, though did have all the new PSA Sabre furniture. Palmetto’s new Sabre line furniture is new looking but has a familiar feel. The stock is a rebranded THRIL CCS which has a good butt pad, multiple sling attachment points, and six positions of adjustment. Accordingly, it should be no surprise the grip appears to be a rebranded THRIL RTG. This grip offers a good, more straight-down angle and features four pretty aggressive grip panels front, rear, and both sides. The trigger was a bit of a surprise at first. I had not previously tried the Hiperfire RBT but found it immediately to be a delight as it was crisp and fast. Much better than the mil-spec or even EPT triggers from PSA's standard line. This is a single-stage trigger and has a pretty short throw, maybe a few millimeters. There is no build; the trigger doesn’t move until it breaks very cleanly at 2.6 lbs. on the Lyman Digital Gauge. Reset was immediate and was both tactile and audible. I really liked this trigger and found its short throw and reset capable of running very quickly while still doing well in providing accuracy. Unless I miss my guess, the magazine, too, appears to be a rebranded THRIL, 30-round PMX. I’ve used these in the past and have had good results with seating, feeding, and locking back on the last round. PSA Sabre Downsides ------------------- The biggest stumble for the 20-inch Sabre was steel-cased ammo. Tul Ammo caused several failures to feed and one group even opened up to 5.5 MOA. Cleaning the feed ramps solved the feeding issues. The 13.7 inch Sabre ran Tul without issues. The Sabre series is also a bit heavy and weighted towards the front. Fit and finish are excellent overall, but there is a tiny bit of wiggle between the upper and lower, and the rail lines don't flow perfectly into the receiver. Finally, not every Sabre model gets ambidextrous controls. The 13.7-inch model I shot had standard controls, so lefties should check the specific configurations before buying. Who Should Buy the Sabre? ------------------------- The Sabre series is made for the AR-15 enthusiast who wants something a little higher quality without paying a lot more for it. With all the options available, you can’t really pin the series down to a dedicated use. Any number of applications are within reach, from a long-barreled, designated marksman all the way down to pinned and welded 13.7-inch options. It’s really up to the user to determine what they either want to pull off the rack or build for themselves. Palmetto kept the prices low but **punched up** the value. Upgrades & Accessories for the PSA Sabre --------------------------------------------- Getting started? ShellShock Protection, our sister company, offers a full starter pack! **ShellShock Protection Tactical Starter Pack** I used a PA PLx for this review and it did really well mounted on the Sabre. **Primary Arms PLx 6-30x56 FFP Rifle Scope** A bipod is also handy when shooting. I prefer the Magpul because it works and it's cheap. **Magpul Bipod** -- ppt/faq-widget -- **Palmetto State Armory Sabre** Final Verdict ------------- With the **[Sabre series](https://admin.pewpewtactical.com/go/psa/psa-sabre/)**, Palmetto State Armory introduced a higher premium product while staying respectful of the budget-minded folks who helped them become so successful. The Sabres are good guns and performed well, with the exception of steel-cased ammo, and even that cleared up after cleaning. I’m really impressed that both these guns come in under that magic $1,000 price tag. But this is only the beginning of the story of the Sabre line. You can go in and buy the one you want or "roll your own" by choosing options from Palmetto to your heart’s content! **Did the Sabre line live up to your expectations? Let us know in the comments below. Check out our guide to the best ARs at [11 Best AR-15s: Ultimate Guide!](https://www.pewpewtactical.com/best-ar-15/)** Meet the Experts ---------------- At the helm of this review was Pew Pew Tactical Content Producer [**Sean Curtis**](https://www.pewpewtactical.com/author/sean-curtis/). Sean has been shooting since childhood but really began to delve into guns more during his law enforcement career. He spent over two decades in law enforcement, where he became a POST-certified handgun instructor and NLEFIA Red Dot Instructor and received CLEFIA Advanced Firearms Instructor Training and AR-15 armorer training. He has since attended a variety of training, including Tactical Performance Center Handgun Mastery & Carbine Mastery, and earned USCCA rifle instructor certification. Aside from training and prior to joining the Pew Pew Tactical team full-time, Sean wrote for several gun publications evaluating and testing guns and gear and has written hundreds of articles. He has spent plenty of time behind AR-15s so he knows what works and what doesn't. This review was edited by Editor-in-Chief [**Jacki Billings**](https://www.pewpewtactical.com/author/jackibillings/), who runs Pew Pew Tactical’s experienced team of reviewers. Jacki is a member of the Society of Professional Journalists, ACES: Society for Editing, and the Professional Outdoor Media Association and has her bachelor’s degree in Mass Communications. She has worked as a media professional for close to 20 years, specializing in gun media for almost 10 years, and has worked as an editor for five years. She uses her extensive professional journalism and editing experience to set testing protocols and [**editorial standards.**](https://www.pewpewtactical.com/how-we-rate-reviews/) Latest Updates -------------- **September 2026:** *Added additional data and information*.